Hale Hana Mea Hana Pono MCCB

Ma waho aʻe o kā mākou laulima piha oNā mea hoʻoheheʻe kaapuni i hana ʻia (MCCB), Hāʻawi pū ʻo CDADA i kahi koho piha o nā lako MCCB pili. Loaʻa nā mea hana o loko a me waho; e ʻoluʻolu e kelepona mai iā mākou inā makemake ʻoe i ke kōkua me ke koho huahana a i ʻole ke kākoʻo ʻenehana.

He aha nā mea lako MCCB?

Nā lako MCCB he mau mea hoʻohui i hoʻolālā ʻia e hoʻonui i ka hana, pale, a me ka mana o ka Molded Case Circuit Breakers (MCCBs). Hoʻololi kēia mau mea hoʻohui i kahi mea hoʻoheheʻe kaapuni kumu i mea naʻauao, hoʻohui pū ʻia o nā ʻōnaehana uila a me nā ʻōnaehana mana. Ke hana nei ma laloIEC 60947-2 (circuit-breakers) aIEC 60947-4-1 (nā mea hoʻopili a me nā mea hoʻomaka kaʻa), hiki i nā lako MCCB ke hana mamao, ka nānā ʻana i ke kūlana, ka pilina palekana, a me ka hoʻohui pono ʻana me ka hoʻokele hale a me nā ʻōnaehana ʻoihana.

Hāʻule nā lako MCCB i ʻelua mau ʻāpana:

Lako Kuloko: Kau ʻia i loko o ka lua haʻihaʻi (nā huakaʻi shunt, hoʻokuʻu undervoltage,nā hui kōkua, nā mea hoʻopili hoʻāla)

Nā mea hana waho: Kau ʻia ma luna o ka mea haʻihaʻi ma waho a i ʻole paʻa (nā lima wili, nā pani puka, nā uhi pahu, nā kumu lōʻihi)

Ke ulu nui nei ka mākeke hoʻohui MCCB honua i ka ulu ʻana e ka hoʻohana ʻana i ka grid akamai, ka ʻenehana ʻoihana, a me ka hoʻohui ʻana i ka ikehu hou, me nā mea hana e like me Schneider Electric, ABB, Eaton, a me Chint e hāʻawi ana i nā portfolios accessory piha i kūpono i kā lākou pae MCCB.

MCCB Mea Hoʻohui Huahana Huahana & Hoʻonohonoho

Māhele	ʻAno mea kōkua	Hana	ʻIkepili ʻenehana
Hana mamao	Ka huakaʻi hele (MX)	ʻO ka huakaʻi mamao ma o ka hōʻailona uila waho	AC: 24V, 48V, 110V, 230V, 400V; DC: 12V, 24V, 48V, 110V; Inrush 200VA (AC)/200W (DC), Sila 20VA (AC)/20W (DC); Ka manawa huakaʻi <50ms
	Hoʻokuʻu ʻia ʻo Undervoltage (MN/UVR)	ʻO ke kuʻi ʻakomi ke hāʻule ka uila ma lalo o ka paepae	ʻOhi: 0.85×Un; Haʻalele: 0.35-0.7×Un; Ka lōʻihi o ka manawa: 0.1s-3s (hoʻololi); Dute mau
	Mea hoʻohana kaʻa (MO)	ʻO ka hoʻouka uila a me ka hana ʻana o ka mīkini wāwahi	Hāʻawi AC / DC, 3-5 mau manawa hana, hoʻopau lima, manaʻo manaʻo
Hōʻailona Kūlana	Hoʻokaʻaʻike kōkua (AX)	Hōʻike i ke kūlana haʻihaʻi (ON/OFF)	1NO+1NC a i ʻole 2NO+2NC, 10A ma 230V AC, nā mea hoʻopili kālā, hana paʻa.
	Hoʻokaʻaʻike Alarm (AL)	Ua ʻāhewa ka mea haʻihaʻi hōʻailona	1NO+1NC, hana wale ma ka huakaʻi (ʻaʻole manual OFF), ʻokoʻa mai nā mea kōkua
	Hoʻokaʻaʻike hōʻailona hewa	Hōʻike i nā ʻano hewa kikoʻī (ʻoi aku ka nui, ka pōkole, ka hewa honua)	Hoʻokumu ʻia ka Microswitch, hoʻohui ʻia me nā ʻāpana huakaʻi uila
Palekana & Pili	Paʻa Rotary	Hana waho ma ka puka/panel	Kūleʻa a lōʻihi paha, padlockable, IP65, pani puka
	Puka Puka	Kāohi i ka wehe ʻana o ka puka i ka wā e ON ai ka mea haki	Hoʻopili mīkini, hiki ke lanakila no ke komo pilikia
	Laka Ki	Hoʻopaʻa i ka hana i nā limahana i ʻae ʻia	Nā ʻano laka he nui (Ronis, Profalux), hiki ke wehe ʻia ke kī ma ON a i ʻole OFF
	Loko Mechanical Interlock	Kāohi i ka hoʻopaʻa like ʻana o ʻelua mau mea haʻihaʻi	Uea a i ʻole ʻano lāʻau, no nā noi hoʻololi
Palekana & Nānā	Nā Uʻi Kūlana	Kāohi i ka launa pū ʻana me nā ʻāpana ola	ʻO IP20 a i IP40, nā pale pae, hoʻonui ʻia no ka pilina busbar
	Pākuʻi Māhele	E hoʻonui i ka hoʻomaʻemaʻe ma waena o nā pae	Mea hoʻokaʻawale, 400-690V helu ʻia, hoʻolālā modular
	Mea Hoʻopaʻa Paʻa (SPD)	E pale i ka mea wawahi mai ka uwila	ʻAno 1 + II, 12.5-15kA impulse i kēia manawa, hoʻopili ʻia
Kamaʻilio & akamai	Hoʻokaʻaʻike kōkua ʻole	Nānā kūlana mamao ma o Bluetooth/WiFi	ʻO Tuya App kūpono, 45mm ākea, pākaukau a i ʻole ka mana ponoʻī
	Module kamaʻilio Modbus	Hoʻohui me nā ʻōnaehana BMS/SCADA	RS485 interface, ʻikepili manawa maoli, hiki ke hoʻomalu mamao
	PowerTag Energy Sensor	Nānā ikehu uila	1% pololei, ʻikepili 15-minuke, hoʻohui i ke ao

Mea Hoʻohālikelike Hoʻohālikelike (Maʻamau):

Nui o ka Papa MCCB	Kaʻahele Shunt	UVR	Kokua	Mea hoʻokele kaʻa	Paʻa Rotary
100A-250A	Kuloko	Kuloko	Kuloko/waho	Kuwaho	Kuwaho
250A-630A	Kuloko	Kuloko	Kuloko/waho	Kuloko/waho	Kuwaho
630A-1600A	Kuloko	Kuloko	Kuloko	Kuloko	Kūwaho/Hoʻonui
1600A-2000A	Kuwaho	Kuwaho	Kuwaho	Kuwaho	Hoʻonui/kaumaha

Nā Hana Koʻikoʻi a me ke Kumu Hana

Ka huakaʻi hele ʻana (MX) - Mechanism Tripping Mechanism

ʻāpana	Hana	Nā kikoʻī ʻenehana
Koila Electromagnetic	Hoʻokumu i ke kahua magnetic ke hoʻoikaika ʻia	AC: Inrush 200VA, sila 20VA; DC: Inrush 200W, sila 20W; Papa Hoʻokohu F (155°C)
Mechanism Plunger	Kuʻi i ka pahu huakaʻi e hoʻokuʻu i ka mīkini	ʻO ke kila paʻakikī, hoʻihoʻi puna, hahau 5-10mm
Pūnaehana Hoʻokaʻaʻike	Hoʻokaʻawale ʻia mai nā kaapuni hoʻomaha nui	Hoʻoikaika ʻia ka insulation, 4kV impulse ke kū
Ke kau ʻana	Snap-fit a i ʻole i hoʻopaʻa ʻia i loko o ka lua wāwahi	ʻO ka hoʻokomo ʻole ʻana i nā mea hana ma ka hapa nui o nā MCCB hou

Kaʻina hana:

Hoʻohana ʻia ka volta hoʻomalu i nā pahu huakaʻi shunt (maʻamau 110-240V AC a i ʻole 24V DC)

Hoʻoikaika ka coil, hoʻopuka i ke kahua magnetic

Kuʻi ʻo Plunger i ka pahu huakaʻi breaker me ka ikaika 2-5N

Hoʻokuʻu ʻia ka mīkini, wehe nā pilina nui

Hoʻi ka Plunger ma o ka pūnāwai ke wehe ʻia ka uila

Pono ʻo Breaker e hoʻihoʻi lima (pani hou)

Nā noi:

Pūnaehana hoʻomaha pilikia (nā pihi E-stop)

Hoʻohui pū me ka ʻōnaehana hoʻāla ahi (pani ʻakomi)

Ka hoʻokahe ʻana i ka ukana mamao (pane koi)

Nā papahana hoʻoili mea hana (wehe wehe ʻia)

Hoʻokuʻu Undervoltage (MN/UVR) - Nānā Voltage

ʻĀpana	Hōʻike	Hana palekana
Voltage Pickup	0.85 × Un (hiki ke pani ʻia ka mea haki)	Kāohi i ka pani ʻana i ka uila haʻahaʻa
Voltage Haʻalele	0.35-0.7 × ʻAʻole (hiki ke hoʻololi ʻia)	Hele 'akomi ma ka undervoltage
Hoʻopaneʻe manawa	0.1s-3s (nā ʻano uila)	Kāohi i ka hāʻule ʻana mai ka hāʻule ʻana o ka voltage
Dute Hoomau	100% helu volena	Hoʻoikaika mau ʻia ka coil i ka wā hana maʻamau

Manaʻo hana: Hoʻoikaika mau ʻia ka coil UVR i ka wā o ka hana maʻamau, e paʻa ana i kahi latch mechanical i pani ʻia. Ke hāʻule ka uila ma lalo o ka paepae no ka lohi o ka manawa i hoʻonohonoho ʻia, hoʻokuʻu ka latch a holo ʻokoʻa ka mea haki. Ke pale nei kēia:

ʻO ka pōʻino kaʻa mai ka hoʻomaka ʻana o ka uila haʻahaʻa (ke kiʻekiʻe kiʻekiʻe, ka wela nui)

Hoʻomaka hou ka mana ʻole ma hope o ka hoʻihoʻi ʻana o ka mana (pilikia palekana)

ʻO ka hana ʻana o nā lako ma lalo o nā kūlana uila palekana

Kokua & Alarm Contacts - Hōʻailona Kūlana

ʻAno Hoʻopili	Hana	Palapala noi
Hoʻokaʻaʻike kōkua (AX)	Hoʻololi i ke kūlana me nā mea hoʻopili koʻikoʻi breaker	Hōʻike kūlana (ON/OFF), hoʻopaʻa ʻana, nā kaapuni hoʻomalu
Hoʻokaʻaʻike Alarm (AL)	Hoʻohana wale ʻia ma ka huakaʻi ʻakomi	Hōʻike hewa, panel alarm, kiaʻi mālama
Alarm pōkole	Kūkākūkā i ka hana huakaʻi magnetic	Hōʻike hewa koho
Alarm kaumaha nui	Kūkākūkā i ka hana huakaʻi wela	Hoʻomaka mālama pale

Nā Loka Hoʻokaʻaʻike (Maʻamau):

AC-15: 10A ma 230V AC (nā haawe inductive)

DC-13: 2A ma 110V DC (mau haawe inductive)

Haawe liʻiliʻi: 10mA ma 5V (PLC kūpono)

Ola Mechanical: 10,000-100,000 hana

Ola Uila:5,000-50,000 hana (ma ka haawe helu ʻia)

Kaiapuni noi a me nā hihia hoʻohana

Palapala noi	Hoʻonohonoho mea hoʻohui	Nā Koina ʻenehana	Hoʻohui
ʻOihana ʻOihana	Ka huakaʻi Shunt + 2×Kokua + Mea hoʻokele kaʻa	24V DC mana, hana wikiwiki (<50ms), pane pane	Hoʻohui PLC/DCS, mana HMI mamao
Na Hale Kalepa	UVR + Auxiliary + Rotary lima	230V AC, pani puka, padlockable	ʻO ka hoʻohui BMS, hoʻopili ahi ahi
Nā kikowaena ʻikepili	Shunt huakaʻi + Alarm + Module kamaʻilio	48V DC, hōʻailona hōʻano hou, Modbus/BACnet	ʻO ka lako polokalamu DCIM, ka hoʻokahe ʻana i ka ukana
Na Keena Ola	UVR + 2×Kokua + Laka kī	Lapaʻau lapaʻau, hilinaʻi kiʻekiʻe, kaohi ʻia	ʻO ka hoʻokele mana koʻikoʻi, nā paneli kaʻawale
Ikehu Hou	Ka huakaʻi hele + Ka pale ʻana i ka piʻi + ʻole	1000V DC hiki, helu waho, kiaʻi mamao	Solar SCADA, ʻōnaehana hoʻokele ikehu
Aila & Gas	Nā mea hana pahū + UVR + Shunt	Hoʻopaʻa ʻia ʻo ATEX/IECEx, kūpaʻa i ka corrosion, tropicalized	Pūnaehana pani pilikia (ESD)
Moana/Ma waho	UVR Tropicalized + Mechanical interlock	55°C ambient, paʻakai paʻakai pale, redundant	ʻO ka mīkini moku, ka hoʻonohonoho hoʻonohonoho
ʻOihana	ʻO ka mea hoʻohana kaʻa kaʻa + rotary lōʻihi + hoʻololi kūlana	400V AC, kaumaha-hana, 50,000 pōʻaiapuni ola	Pūnaehana SCADA, nā kikowaena mamao

Ka Laʻana Hoʻohui Hale Naauao: ʻO nā lako MCCB hou e hiki ai i ka hoʻokele ikehu holoʻokoʻa:

Nā mea ʻike uila PowerTag nānā i kēia manawa, ka uila, ke kumu mana no kēlā me kēia haʻihaʻi

Hoʻopili kōkua ueaʻole hoʻouna i ke kūlana breaker i ka ʻōnaehana kikowaena

Nā huakaʻi hele hiki i ka hoʻokahe ʻana i ka ukana i ka wā koi kiʻekiʻe

Modbus modules hoʻohui me ka automation hale no ka mālama wānana

Ke Kaʻina Hana Hana a me ka Hana Hana Hana

Ka Papa Hana Pono

IQC → Electromagnetic Coil Winding → Plunger/Armature Machining → Contact System Fabrication → Housing Injection Molding → Sub-Assembly → Calibration & Testing → Hoʻohui hope → Packaging

Nā ʻanuʻu hana koʻikoʻi

Ke kahua	Kaʻina hana	Nā Lae Mana Mana
ʻAli ʻāwili	Uea keleawe enameled (0.1-0.5mm), wili wili me ka mana hoʻopaʻapaʻa, impregnation vacuum varnish	Huli helu ± 1%, DC kū'ē ± 5%, dielectric ikaika 2kV/1min, insulation kū'ē >100MΩ
Plunger/Armature Mīkini	ʻO ke kila ʻōwili anuanu a i ʻole ka pauka hao, ka wili pololei, ka paʻakikī (HRC 45-55), ka mālama ʻana i ka ʻili.	ʻO ka hoʻomanawanui ʻana ± 0.02mm, hoʻopau i ka ʻili Ra 0.8, hiki ke hoʻololi ʻia ma kahi o 5000
Hoʻokaʻaʻike hana	Kālā-nickel (AgNi 90/10) a i ʻole kala-cadmium oxide (AgCdO), hehi ʻana, riveting a wili paha i nā mea lawe keleawe	ʻO ka paʻakikī HV 80-120, ke kūpaʻa hoʻopili <50mΩ, ka ikaika pahū> 50MPa
Hoolei Hale	PA66 GF30 a i ʻole PBT GF30, 280-320 ° C injection, 17.5mm modularity no DIN rail compatibility	ʻO ka hoʻomanawanui ʻana ± 0.1mm, helu helu helu ʻana >600V, UL 94 V-0
Hana Puna	ʻO ke kila kalapona ʻaila SWOSC-V a i ʻole ke kila kila 301, CNC coiling, mālama wela	ʻO ke ola luhi> 100,000 pōʻaiapuni, punawai ± 10%, hoʻomaha <5%
ʻAhaʻi ʻAha	Coil-plunger-contact integration, hoʻololi i ka hahau ʻana, hoʻāʻo ʻana i ka mīkini paʻi	Volta hana 0.85-1.1×Un, ikaika huakaʻi 2-5N, manawa pane <50ms
Hoʻopaʻa hope	ʻO ka hōʻoia hōʻoia ʻana o ka pilahi / haʻalele ʻana (UVR), ke ana manawa hana (ka huakaʻi shunt), ke kūpaʻa pili	ʻO 100% ka hoʻāʻo ʻana, ka hoʻopaʻa inoa ʻana i ka ʻikepili, ka traceability QR coding

Nā Mea Kiʻekiʻe a me nā mea kiko'ī

ʻāpana	Mea kiko'ī	Nā Kūlana Mea Hoʻolako	Na Waiwai Ki
Uea Coil	Uea keleawe enameled Papa F (155°C) a i ole Papa H (180°C)	IEC 60317, NEMA MW 35	ʻO ka uila hoʻohaʻahaʻa> 2kV, hiki i ka solderability 390°C/2s, hiki ke maʻalahi
Koko Magnetic	ʻO nā lamination kila silikoni (0.35-0.5mm) a i ʻole ka hao paʻa	IEC 60404-8, JIS C 2552	Kiʻekiʻe permeability, coercivity haʻahaʻa, mau waiwai magnetic
Plunger/Armature	ʻO ke kila kila SPCC a i ʻole ka pauka hao (Fe-99%)	JIS G 3141, MPIF Kūlana 35	HRC 45-55, hoʻopau i ka ʻili Ra 0.8, pale ʻana i ka corrosion
Hoʻopili	Kālā-nickel (AgNi 90/10) a i ʻole AgCdO	ASTM B152, IEC 60368	Conductivity> 90% IACS, arc erosion resistance, anti-weld
Hoʻokaʻaʻike Puna	Ke keleawe Beryllium (CuBe2 C17200) a i ʻole ke kila kila 301	ASTM B196	ʻO ke ola luhi> 100,000 mau pōʻaiapuni, paʻa paʻa, pale i ka corrosion
Hale noho	PA66 GF30 a i ʻole PBT GF30, pale ahi	IEC 60664-1, UL 94 V-0	Helu helu helu >600V, pale wela 160°C, ikaika hopena >7 kJ/m²
Nā ʻōkuhi	Ke keleawe C36000 a i ʻole ke keleawe C11000 me ka paʻi pā	ASTM B16/B187	ʻO ka nui o kēia manawa 1.0-1.5 A/mm², kū i ka torque 1.5-2.5Nm
DIN Rail Clip	Ke kila puna 65Mn a i ʻole ke kila kila 304	GB/T 1222, ISO 3506	Paʻa ikaika 50-100N, 10,000 pōʻalo luhi, pale ʻino

Nā Kūlana Kūlana & Nā Kūlana Ho'āʻo

Nā Kūlana Kūlana Kūikawā

Kūlana	ʻĀpana	Koi pili
IEC 60947-2	Mea hoʻololi uila haʻahaʻa - Nā mea hoʻopau kaapuni	ʻO ke kūpono kūpono, ka hui pū ʻana me ka breaker, kūʻokoʻa pōkole
IEC 60947-4-1	Nā mea hoʻopili a me nā mea hoʻomaka kaʻa	ʻO ka hana kaʻa kaʻa, nā koi kaʻapuni hoʻomalu
IEC 60947-5-1	E hoʻomalu i nā mea hana kaapuni a me nā mea hoʻololi	Nā helu hoʻopili kōkua, hoʻomanawanui uila, hōʻailona terminal
RoHS/REACH	Hoʻokō kaiapuni	ʻO nā kaohi ʻana i nā mea ʻino, nā ʻōlelo hoʻolaha

Nā ʻano hoʻāʻo pono (IEC 60947-2 / IEC 60947-5-1)

Māhele hoʻāʻo	Ho'āʻo kikoʻī	Koina ʻae
Hoomanawanui Uila	10,000 hana ma ka helu helu ʻia (AC-15/DC-13)	Hoʻopili i ka lole <50%, ʻaʻohe welding, hana mau
Hoomanawanui Mechanical	100,000 mau hana hoʻouka ʻole	<5% ka hoʻoheheʻe ʻana, ʻaʻohe hana hana
Na waiwai dielectric	2kV AC/1min (nā kaapuni hoʻomalu), 4kV impulse	ʻAʻohe haki, ʻaʻohe flashover
Piʻi wela	Ka hana mau i ka volta helu/i kēia manawa	Coil ≤85K (Class F), nā hopena ≤80K
Haʻalulu & Haʻalulu	IEC 60068-2-27 (puʻi), IEC 60068-2-6 (kuʻi)	ʻAʻohe hana hoʻopunipuni, ʻaʻohe pōʻino, hana ma hope o ka hoʻāʻo
Kaiapuni	ʻO ka wela wela (IEC 60068-2-30), anu, wela maloʻo	Hoʻohana ma hope o ka hoʻopili ʻana, ʻaʻohe corrosion
EMC	Ka palekana i ka hoʻokō/radiated interference	ʻAʻohe hana ʻino, EN 60947-2 Annex F

Nā Kūlana Kūlana Kūlana o ka Hale Hana

QC mea komo mai (IQC)

Mea waiwai	Nā mea nānā	Hoʻolālā Laʻana	Mea lako
uwea enamel	ʻO ke anawaena, ka hoʻohaʻahaʻa voltage, elongation, solderability	AQL 0.65	Micrometer, mea hōʻike dielectric, mīkini tensile
kila mākēneki	Permeability, poho kumu, ka uhi ʻana	I kēlā me kēia pūʻulu	Epstein frame, hoʻokahi pepa hōʻike
Pili kala	ʻO ka maʻemaʻe, ka paʻakikī, ka nui, ka hoʻomanawanui dimensional	I kēlā me kēia pūʻulu	Spectrometer, mea hōʻike paʻakikī, CMM
ʻO nā granule palaki	Maʻiʻo aniani, viscosity, moisture, flammability	I kēlā me kēia pūʻulu	Mea helu helu hoohehee, DSC, UL 94
Ke kila puna	Ka ikaika tensile, ka luhi luhi, ka hana ʻana	I kēlā me kēia pūʻulu	Mīkini tensile, hōʻike luhi

Ka Mana Mana Pono (IPQC)

Kūlana	Nā ʻāpana hoʻomalu	Ka pinepine	Kaʻina hana
wili wili	Huli ka helu, ʻāʻī, kū'ē, insulation	ʻO kēlā me kēia ʻāpana	ʻO ka wili ʻana me ka manaʻo, ohmmeter
Mīkini plunger	ʻO ka hoʻomanawanui ʻana, hoʻopau ʻili, paʻakikī	ʻO kēlā me kēia 100 ʻāpana	CMM, profilometer, mea ho'āʻo paʻakikī
Hui hui	Alignment, kaomi, pale, brazing quality	ʻO kēlā me kēia 100 ʻāpana	Anana ikaika, micro-ohmmeter, XRF
Hoʻolili hale	Ka wela, ke kaomi, ka pololei ana	ʻO kēlā me kēia pōʻai	Nānā SCADA, palapala SPC
ʻĀpana haʻahaʻa	Volta hana, hahau, pane manawa	ʻO kēlā me kēia ʻāpana	Pahu ho'āʻo 'akomi, hoʻopaʻa 'ikepili

Mana Mana Mana Loa (FQC) & QC Puka (OQC)

Mea hoao	Kūlana	Laʻana Laʻana
Laulā uila hana	0.85-1.1×Un (piʻi), >0.2×Un (haʻalele no UVR)	100%
Ka manawa pane (huakaʻi shunt)	<50ms ma ke kaha helu	100%
Kū'ē pili	<50mΩ (kokua), <100mΩ (pūmeka)	100%
ʻO ka dielectric e kū i ka uila	2kV AC/1min	100%
Kūleʻa hoʻokaʻawale	>100MΩ @ 500V DC	100%
Hana mīkini	10 mau pōʻai, maʻemaʻe, ʻaʻohe pipili	100%
Hoʻopili pili paʻi	Ka male ʻana me ke kiʻi MCCB i koho ʻia	100%
Nānā hiʻona a me ka nui	Hoailona mau, modularity	100%
ʻO ka laʻana hoʻomanawanui uila	1,000 mau hana ma ka haawe helu	AQL 1.0
Hoʻopaʻa paʻa	Ho'āʻo hāʻule, haʻalulu (ISTA 3A)	Ma ka hailona

Hana Hana & Hana Hana

Nā lako hana kiʻekiʻe

Māhele Lako	ʻIkepili mīkini	Hana	Ka hiki
ʻAli ʻāwili	ʻO nā mīkini wili CNC (Nittoku/Marsilli) me ka hoʻomalu ʻana	ʻO ka hana wili pololei	20,000 wili / lā
Hoʻopaʻa ʻia a hoʻokumu ʻia	60-toni paʻi make holomua (Bruderer)	Hoʻopaʻa hoʻopili, hana puna	30,000 mau mea / lā
Hoʻoheheʻe ʻia	80-toni mīkini paʻi wela (Arburg)	ʻO nā hale, nā pā, nā pahu kaʻaahi DIN	10,000 hale / lā
Ahahui	Hui hana	Sub-assembly, calibration, hoao	5,000 mau mea hana / lā no ka laina
Lako Hoao	Pahu hoʻāʻo ʻokoʻa	Nā hiʻohiʻona hana, ka manawa, ka hoʻomanawanui	1,000 ʻāpana / hola
	Mea hōʻike hoʻomanawanui mechanical	100,000 hōʻoia pōʻaiapuni	200 mau ʻāpana i ka manawa like
	Keena ho'āʻo EMC	ʻO ka hoʻāʻo ʻana i ka pale ʻana	100 ʻāpana / lā

Hana Hana & Manawa Manawa

Māhele Huahana	Hiki i kēlā me kēia mahina	Manawa alakai maʻamau	Hiki ke kauoha koke
Nā Kaʻahele Shunt (nā voltage a pau)	300,000 mau ʻāpana	4-5 wikiwiki	3 lā
Hoʻokuʻu Undervoltage	200,000 mau ʻāpana	4-5 wikiwiki	3 lā
Hoʻopili kōkua	500,000 mau ʻāpana	4-5 wikiwiki	3 lā
Nā mea hoʻohana kaʻa	50,000 ʻāpana	4-5 wikiwiki	5 lā
Nā Module Kūkākūkā	30,000 ʻāpana	4-5 wikiwiki	5 lā

ʻEnekinia & ʻenehana Hui Pūʻulu

Oihana	Paahana	ʻike	Nā kuleana
R&D 'enekinia	5 nā ʻenekinia	ʻO ka hoʻolālā electromagnetic, hoʻopili physics, ʻōnaehana hoʻopili, kamaʻilio kelepona	Hoʻomohala ʻokoʻa hou, nā hiʻohiʻona akamai, ka waihona patent (30+ mau patent)
Kaʻina Hana Hana	15 enekinia	ʻO ka hoʻoheheʻe ʻana i ka coil, ka hoʻopaʻa pololei ʻana, ka hoʻoheheʻe ʻana i ka plastik, ka hana lean	Hoʻonui i ka hana, hoʻomaikaʻi i ka hua (> 99%), hoʻemi i ke kumukūʻai
Ka ho'āʻo a me ka hōʻoia	12 enekinia	IEC 60947 hoʻokō, hoʻāʻo hoʻomanawanui, EMC, simulation kaiapuni	ʻAno hoʻonohonoho hoʻāʻo, ka nānā ʻana i ka hemahema, ka hoʻokele hōʻoia
Hoʻohana ʻenehana	10 enekinia	Hoʻohui ʻia ʻo MCCB, ʻōnaehana mana, BMS/SCADA interface	Kākoʻo ʻenehana mea kūʻai aku, hoʻolālā ʻōnaehana, hoʻokō
Hōʻoia maikaʻi	25 ʻenehana	ISO 9001, IATF 16949, kaʻina hana helu helu, metrology	Hoʻoponopono ka mea hoʻolako, loiloi kaʻina, hana hoʻoponopono, calibration

No ke aha e kū kaʻawale ai kā mākou mea hana MCCB Accessory

Hōʻike kā mākou hale hana40 mau makahiki o ka hana kūikawā i nā mea hoʻololi haʻahaʻa haʻahaʻa, e hāʻawi ana i nā lako MCCB i ʻoi aku ma mua o nā kūlana honua ma o:

ʻO ka hoʻolālā ʻōiwi-breaker: Nā mea hana i hana pono ʻia no ka hoʻohui pono ʻole ʻana me nā paepae MCCB nui (Schneider NSX, ABB Tmax, Eaton NZM, Chint NXM), e hōʻoia ana i ka hoʻokomo ʻana me ka hana pono ʻole.

ʻO nā mea hoʻohana akamai: Nā mea hoʻopili kelepona ʻole a me nā mea ʻike nānā ikehu e hoʻololi ai i nā mea wāwahi maʻamau i nā mea akamai i hoʻohana ʻia i IoT me ka ʻole o ka hoʻololi ʻana.

Hoʻohui kū pololei:ʻO ka wili ʻana i loko o ka hale me ka impregnation vacuum, ka hoʻopili pololei ʻana, a me ka hoʻoheheʻe thermoplastic e hōʻoia ana i ka mana piha o ka maikaʻi a me ka hana maʻamau.

Hoʻāʻo i nā ʻōnaehana: $2M+ i hoʻolilo ʻia i ka hoʻāʻo ʻokoʻa e pili ana i ka hōʻoia hoʻomanawanui mechanical 100,000-cycle, hoʻāʻo immunity EMC, a me ka hoʻāʻo ʻana i ka MCCB.

Hoʻoponopono wikiwiki: ʻO ka hana maʻalahi e hiki ai i ka volta, hoʻonohonoho hoʻopili, a me ka hoʻoponopono protocol kamaʻilio me nā manawa alakaʻi 2-wiki

Hana kikohoʻe: Hoʻokō 'oihana 4.0 me ka traceability holoʻokoʻa, ka nānā 'ana i ka maikaʻi wānana, a me ka calibration automated e hōʻoia ana i ka ± 3% mau koho.

No nā kikoʻī kikoʻī, hōʻoia hoʻohālikelike MCCB, hoʻohui hale akamai, a i ʻole ka hoʻonohonoho loiloi hale hana, hāʻawi kā mākou hui ʻenekinia i ke kūkākūkā pololei e hōʻoia i kāu pale uila a me nā ʻōnaehana hoʻokele e hoʻokō i nā koi ʻelua a me nā pahuhopu hilinaʻi lōʻihi.

View as

Hoʻokuʻu ʻia ʻo MCCB Shunt

E ʻike i ka CDADA MCCB Shunt Release no ka mana mamao o kāu mau hana hoʻomaha kaapuni. Loaʻa ma 220V AC/DC, kūpono ia no nā noi e koi ana e hemo koke. E maʻalahi e hoʻouka, me nā wili i hoʻopili mua ʻia mai ka hale hana—e hoʻohui wale i kāu hōʻailona mana. Kūpono no nā ʻōnaehana palekana ʻoihana a me nā ʻoihana.

Nānā hou aku >> E hoʻouna i ka nīnau >>

Hoʻokaʻaʻike kōkua MCCB

ʻO CDADA ka mea hana a me ka mea hoʻolako o MCCB Auxiliary Contact, hiki i kēia huahana ke lilo i mea hoʻonā no ka nānā ʻana a me ka hoʻokele ʻana i nā mokuʻāina ʻoki. Loaʻa i nā hoʻonohonoho like 2NO/2NC, kūpono ia no ka hōʻailona ʻana i ke kūlana wehe/pani. Pre-wired no ka hoʻokomo maʻalahi, kūpono no nā ʻōnaehana mana ʻoihana. E hilinaʻi iā CDADA no ka hilinaʻi a me ka hana.

Nānā hou aku >> E hoʻouna i ka nīnau >>

He MCCB Mea Hana mea hana a mea hoʻolako ʻo CDADA ma Kina. Hāʻawi kā mākou hale hana i nā ʻoihana like ʻole e like me nā ʻōnaehana mana, kūkulu ʻana i ka automation, a me ka hana ʻenehana, e hāʻawi ana i nā hoʻonā OEM/ODM maʻalahi.

Nūhou Manaʻo